Directed Directechs DB3 Instrukcja instalacji - Strona 17

Feature and option list

It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing

page at www.directechs.com. The web offers more options; however, manual configuration of the features is possible using the

information on this page.

* Default option

Feat.

Operation

Flashes / Option

1. No RF Output* Module is connected to a remote starter using a standard installation.

RFTD Output

2. RFTD Output

Type

3. SmartStart

Smart OEM

1. Disabled

Alarm Control

2. Safelock

3. Enabled*

OEM Alarm

1. Disabled*

Override

2. Enabled

403.FORD10 3.11 2017 Ford F-150 Work Truck

Description

Module is connected to an XL202 using an RSR or RXT installation (when available).

Module is connected to SmartStart using an RSR or RXT installation (when available).

The OEM alarm will not be controlled by the interface upon remote start. No disarm

or arm command will be executed at the beginning or end of the sequence; it must

be controlled by the Remote Starter.

Smart OEM Alarm Control will behave like a standard Safelock feature on a remote

starter. It will unlock at the beginning of the sequence, and relock after start and

shutdown.

Smart OEM Alarm Control will synchronize with the OEM alarm so that it will

disarm and rearm the vehicle in the remote start sequence, only when required.

Smart OEM Alarm Control will monitor the alarm and door lock status to detect if

the disarm or rearm is required. If the vehicle is unlocked or is not equipped with

factory alarm, the disarm/rearm will not be executed.

The OEM alarm can only be controlled with the OEM remote. The aftermarket

system cannot disable the OEM alarm if it is triggered.

The OEM alarm will never be armed, even when arming with the OEM remote.

When locking with the OEM remote, the vehicle will lock 1 second after the

command was received. An aftermarket alarm/hybrid system is recommended.