Zanussi ZHT610W UK Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Okap wentylacyjny Zanussi ZHT610W UK. Zanussi ZHT610W UK 17 stron.
Również dla Zanussi ZHT610W UK: Instrukcja instalacji (16 strony)
Drukuj stronę
The clereance height between the inferior part
of the cooker hood and the hob must be 650
mm ( some models can be fitted at a lower
height from the hob, please refer to the installa-
tion paragraph).
Unpacking
The fittings supplied to install this cooker
hood can be found with the instruction book
inside the packaging and consists of the following:
Ducting spigot
Blanking plate
Wall / suspended fixing template
Wall Fitting
The cooker hood is fitted to the wall using the
keyhole slots in the back of the hood.
1.
Mark the position on the wall for the two
Ø 8mm dia screw holes (A) as illustrated in the
drawing opposite at 568mm.
2.
Check that the hole distances are correct and are
level using a spirit level.
3.
At this stage it is important to allow 25mm (1")
clear space above the cooker hood to enable it
to be hooked onto the screws and for subsequent
removal for decorating or servicing.
4.
Insert the screws and tighten to a distance of
5mm.
12