Directed Directechs DB3 Instrukcja instalacji - Strona 17

Drukuj stronę

Directed Directechs DB3 Instrukcja instalacji

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there are

3 possible ways you can send commands to your vehicle, using the:

• Factory remote.

• Aftermarket remote.

• Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times quickly

on your factory remote.

Vehicle takeover with Get In and Go

Close the vehicle doors, hood and trunk, then press the

Remote Start button on the transmitter to start the vehicle.*

Press the Unlock button on the factory or aftermarket

remote.*

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle, while making sure the factory remote is

inside with you.

Important: Follow the option that has been checked off

by your technician:

Depress the brake pedal for a minimum of 3 seconds

then put the car in gear and drive off.

Press the PTS button twice. Depress the brake pedal

for a minimum of 3 seconds then put the car in gear and

drive off.

* Icon and remote appearance may differ depending on the model purchased.

403.KIA10 1.10 2023 Kia Carnival (Smart Key)

Get In and Go

Get In and Go is designed to provide users with easy takeover when entering their Push-to-Start

(PTS) equipped vehicle, once it has been remote started.

Typically, users would have to remote start their vehicle, then get inside and press the PTS button

to perform a takeover. There is therefore a physical action required to drive away. With Get In

and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's left to

do is put the gear in drive and drive off.

Pit stop/idle mode

Stop the vehicle in a safe parking spot

and put the gear in Park (P).

Press Remote

Start button*

Important: Follow the option that has

been checked off by your technician:

Press Unlock on

either remote*

on the transmitter.*

The parking lights will flash once to indicate

the vehicle is now in Pit Stop Mode.

14:36

Enter vehicle

with remote

the transmitter and then press the PTS

button once.*

Ready to

drive off

The parking lights will flash once to indicate

the vehicle is now in Pit Stop Mode.

Exit the vehicle with the factory remote in

hand (it is safe to leave the engine running).

Ready to

drive off

Note: We recommend you always lock the doors

of your vehicle when leaving it unattended.

* Icon and remote appearance may differ depending on the model purchased.

14:36

Press the Remote Start button

14:36

Press the Remote Start button on

Put

gear in

Park

Parking lights flash x1

Press Remote

Start button*

Parking lights flash x1

Press Remote

Start button*

14:36

Exit vehicle

with remote