Zanussi ZCG63260WE Podręcznik użytkownika - Strona 22
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Kuchenki Zanussi ZCG63260WE. Zanussi ZCG63260WE 29 stron.
Drukuj stronę
Problem
The flame ring is uneven.
The oven does not heat up.
The oven does not heat up.
The oven does not heat up.
The lamp does not operate.
The display shows "12.00".
Steam and condensation settle
on the food and in the cavity of
the oven.
SERVICE DATA
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service
Centre.
The necessary data for the service centre is on the
rating plate. The rating plate is on the front frame of
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
WARNING! Refer to Safety chapters.
TECHNICAL DATA
Dimensions
Height
Width
Depth
22
Possible cause
Burner crown is blocked with
food residues.
The oven is deactivated.
The clock is not set.
The necessary settings are not
set.
The lamp is defective.
There was a power cut.
You left the dish in the oven for
too long.
We recommend that you write the data here:
894 - 912 mm
550 mm
609 mm
Make sure that the injector is
not blocked and the burner
crown is clean.
Activate the oven.
Set the clock.
Make sure that the settings are
correct.
Replace the lamp.
Reset the clock.
Do not leave the dishes in the
oven for longer than 15 - 20
minutes after the cooking
process ends.
the oven cavity. Do not remove the rating plate from
the oven cavity.
.........................................
.........................................
.........................................
LOCATION OF THE APPLIANCE
You can install your freestanding appliance with
cabinets on one or two sides and in the corner.
For the minimal distances of fitting check the table.
Remedy