Alecto DBX-57 Podręcznik użytkownika
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Elektroniczna niania Alecto DBX-57. Alecto DBX-57 2 stron.
Drukuj stronę
Getting Started:
1 Take off the belt-clip by sliding it downwards.
Parent unit:
2 Open the battery compartment by sliding the battery
cover downwards and off.
3 Place the two included rechargeable batteries into
the battery compartment. Ensure that the positive and
negative poles of the battery (+ and -) coincide with the
(+ and -) signs in the battery compartment.
4 Reattach the battery compartment cover and the
belt-clip onto the parent-unit.
5 Insert the small plug of one of the included power
adapters into the right side of the parent unit connector
labelled DC 5V. Connect the other end of the power
adapter to a 230V electrical outlet. The parent unit is
now ready to use.
It is recommended to charge the battery pack fully
before cordless usage. The rechargeable battery pack
of the parent unit takes about 10 hours to charge fully
6 Insert the small plug of the other included
Baby-unit:
power adapters into the underside of the baby
unit connector labelled DC 5V. Connect the
other end of the power adapter to a 230V elec-
trical outlet. The baby unit is now ready to use.
General Information:
A
D
E
H
Baby-unit:
DBX-57, USER MANUAL
A
: Sound light indicator:
Parent unit: The sound light will flash
slowly when any sound alert is triggered from the baby unit
B
and fast when more sound is triggered from the baby unit.
C
B
: Power light indicator: The power light of the parent unit will go off
when the unit is switched off; the light will stay on continuously when
the parent unit is switched on; the light will flash every five seconds
when charging (whether the parent unit is switched on or off).
C
: Range light indicator: The Range light indicator will stay on conti-
nuously when the parent unit is linked and in the valid range of baby
unit. The light will Flash when there no link or out of range of the baby
unit.
D
: Built in speaker
E
: Volume down button
F
: On/off button. Press and hold the on/off button for 2 seconds to
F
G
turn the parent unit on; press and hold for 5 seconds to turn the parent
unit off.
I
G
: Volume up button
H
: Power light indicator: Light will go on when the power
adapter is connected and the baby unit is turned on (the baby
unit has no on/off switch).
I
: Built in microphone
1
3
2
4
4
5
6
DC 5V / 600mA
3