Directed AS-RFK2800 Podręcznik użytkownika - Strona 4
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pilot zdalnego sterowania Directed AS-RFK2800. Directed AS-RFK2800 13 stron. Two-way lcd remote system
Drukuj stronę
Charging the Remote Control
Your Autostart LCD remote is powered by an internal rechargeable battery that can only be
serviced by an authorized Directed dealer. Due to transit and storage time prior to your purchase,
the battery charge may have depleted. To ensure proper operation, check the battery level and
connect the battery charger if not fully charged. See the "Battery Information (LCD)" and "Status
Screen Icons" sections for more information about the battery.
Charging the remote control:
1.
Plug the AC adapter into a 110V AC outlet. Insert the mini-USB connector into the mini-
USB port located on the side of the remote control (see diagram under LCD 2-way). The
text field will display CHARGE to indicate the remote control is charging (The remote
remains operational while charging and can command the system).
2.
Once fully charged the text field will display FULL.
3.
The remote control is then ready for use. Disconnect the mini-USB end from the remote
control first and then the AC adapter from the AC outlet.
Note: If the battery is excessively depleted when the charger is connected, functionality may be
delayed while it charges to the minimum voltage required to operate the display, after which normal
charging resumes.
LCD 2-Way
Your remote system is equipped with a 5-button multi-channel remote control. The functions of the
transmitter are as follows:
DISPLAY:
Status Screen: The upper portion of the display contains status icons for the System, Remote
Start and Remote Control.
Text field: The lower portion of display – shows the Clock, or Runtime, as well as Command
confirmations, Page messages and programming menus.
LOCK: Locks the doors.
UNLOCK: Unlocks the
MINI-USB PORT: The battery
charger plugs into this port.
N.B.: Pressing then the LOCK button will activate the AUX 1 output.
Pressing then the UNLOCK button will activate the AUX 2 output.
P.4
doors.
SHIFT: Allows access to programming and modifies operation
of the other buttons.
TRUNK: Opens the
TRUNK.
START/STOP: Remote
starts or stops the engine.
User Guide