Alecto DBX-90 Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Elektroniczna niania Alecto DBX-90. Alecto DBX-90 8 stron. 1.8ghz dect baby monitor, talk back, nightlight with lullaby
Drukuj stronęSensitivity
You can adjust the sensitivity on Parent Unit to monitor the sound from
Baby Unit. For example, if your baby is a particularly quiet sleeper, you
can increase the sensitivity levels so that you are sure to hear if baby
disturbs or becomes uncomfortable.
•
Press
. The Sound Sensitivity LEDs represent current
sensitivity level will steadily lit.
•
Press
to increase or
sensitivity. When all four green LEDs and one red LED are lit, it
represents high sensitivity. When only one green LED is lit, it
represents low sensitivity.
Adjusting Volume
There are 5 volume levels on each Unit and there is also an Off setting
on the Parent Unit.
On the units,
•
Press the
to increase the volume or the
volume
Note: You cannot switch the volume off on the Baby Unit.
Changing the volume setting on the Baby Unit will also affect the
volume while talk back and also the volume of lullaby play.
Talk Back
You can use the talk back feature to talk to your baby.
•
Press and hold TALK on the Parent unit to speak to baby.
•
The green link lights on both Units flash.
•
Talk into parent unit microphone.
•
Release TALK to hear your baby again.
to decrease. There are five levels of
to decrease the
Paging
If the Parent Unit is misplaced, you can use the page button on the
Baby Unit to locate the Parent Unit.
•
Press
on the Baby Unit. The Parent Unit will sound the
paging alert.
•
To stop the Page alert, press any button on the Parent Unit, or
press
again on the Baby Unit.
Note: If no button is pressed, the paging tone will stop after 2 minutes.
If the Parent Unit volume is off, the Parent Unit volume will reset
to mid-volume.
Nightlight
The nightlight on the baby unit can be turned on or off from the baby
unit.
Baby Unit
If the nightlight is off,
•
press and release
to turn nightlight on.
•
Press
repeatedly to select the brightness settings.
If the nightlight is on,
•
press and release Nightlight button to turn nightlight off.
Lullaby
There are 3 lullabies. Each lullaby is played repeatedly for 15 minutes.
You can also select Play All from the menu to play for a medley of all 3
lullabies for 15 minutes.
Playing the Lullaby
Baby Unit
•
Press
. The Lullaby 1 LED is switched on. Press
select Lullaby 2, Lullaby 3 or all three lullabies.
•
Press
to start playing the Lullabies.
again to
6