Alecto DVM-76 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Elektroniczna niania Alecto DVM-76. Alecto DVM-76 20 stron.

Drukuj stronę

3 INSTALLATION

3.1 BABY-UNIT:

Power:

Connect one of the supplied 6V

power adaptors to the 6V DC

input of the baby unit.

Insert the adapter into a 230V

wall socket.

Only use the supplied power adaptor

with model number

S005BNV0600060.

Wall-mounting:

Drill two holes next to each

other in the wall, separated by a

distance of 5.7cm and

insert plugs and screws. The

head of the screw should

stick out of the wall for several

millimeters. Slide the foot of the

baby unit over the screws and

then press the baby unit a little downwards.

Tips for placement:

•

For use as a baby monitor: place the baby unit at

least 2 meters away from your baby and make sure to

safely tuck away the adapter cable.

•

For optimal range, it is advisable to set up the baby unit

as high as possible, free from large metal surfaces.

•

The temperature protrudes from the rear of the baby

unit. Make sure this sensor hangs freely, unexposed to

direct sunlight and avoid heat from e.g. light bulbs.

•

The baby unit is not waterproof. When using outdoors,

make sure to protect the baby unit against moisture

and sand.

>2m

When used as a baby monitor:

Make sure the baby cannot

reach the baby unit or wire.

Place the baby unit at least 2

meters away from the baby

and you can bundle cables that

are too long with tape or cable

ties available specifically for

this purpose.