Clarke XPP15/50 Instrukcja obsługi i konserwacji - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sprężarka powietrza Clarke XPP15/50. Clarke XPP15/50 17 stron. Xppv11 series; xpp15 series; 50l engine driven air compressor
Drukuj stronę
• leave pressure in the receiver overnight, or when transporting.
• adjust, or tamper with the safety valves. The maximum pressure is
factory set, and clearly marked on the machine.
• operate in wet or damp conditions. Keep the machine dry at all times.
Similarly, a clean atmosphere will ensure efficient operation. Do not use
in dusty or otherwise dirty locations.
• touch the machine until it has cooled down...some of the metal parts
can become quite hot during operation.
• operate your compressor with any guards removed.
FIRE PREVENTION
ALWAYS
• switch the engine OFF when refuelling.
• refuel away from any source of heat.
• refuel in a well ventilated area.
DO NOT
• overfill the tank, fill to the level specified.
• smoke whilst refuelling and avoid smoking or using a naked flame near
the compressor.
• start the engine if there is spilled fuel. Any spillage must be wiped clean
and the compressor allowed to dry before attempting to start the
engine.
EXHAUST GAS PRECAUTIONS
ALWAYS
• Make sure that there is adequate ventilation when using the
compressor.
• Position the compressor so that the exhaust is pointed away from people
or animals.
DO NOT
• use the compressor indoors or in an enclosed area. (i.e. in a warehouse,
tunnel, well, hold etc.)
WARNING: EXHAUST FUMES CAN BE FATAL
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
5