Directed Xpresskit DBALL2 Instrukcja instalacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Przez blokady Directed Xpresskit DBALL2. Directed Xpresskit DBALL2 18 stron. Ford5 remote start ready (rsr) installation
Również dla Directed Xpresskit DBALL2: Instrukcja instalacji (12 strony), Instrukcja instalacji (19 strony), Podręcznik (14 strony), Instrukcja instalacji (13 strony), Instrukcja instalacji (14 strony), Instrukcja instalacji (19 strony), Instrukcja instalacji (16 strony), Instrukcja instalacji (20 strony), Instrukcja instalacji (15 strony), Instalacja i skrócona instrukcja obsługi (16 strony), Instrukcja instalacji (18 strony), Instrukcja instalacji (16 strony), Instrukcja instalacji (18 strony), Instrukcja instalacji (16 strony), Podręcznik (19 strony)

Drukuj stronę
Directed Xpresskit DBALL2 Instrukcja instalacji
Platform: DBALL2
Firmware:
HYUNDAI4
Feature & Option List
It is recommended to configure all
flashing page on www.directechs.com. The web offers more options such as
configuration of the features is possible using the information on this page.
* Default Option
Feat.
Operation
Flashes/Options
1. Disabled*
RFTD Output
1
2. RFTD Output
Type
3. SmartStart
Unlock Driver
*Driver Priority
2
Priority
All
1. Disabled
2. Safelock
Smart OEM Alarm
3
Control
3. Enabled*
Remote Start Ready
the
features and options listed below
Module is connected to a remote starter using a standard installation.
Module is connected to an XL202 using an RSR or RXT installation (when available).
Module is connected to SmartStart using an RSR or RXT installation (when available).
Unlocks only the driver door on first press and unlocks all doors on a second press within 5 seconds.
Unlocks all doors on first press.
The OEM alarm will not be controlled by DBALL2 upon remote start. No disarm or arm command will be
executed at the beginning or end of the sequence; it must be controlled by the Remote Starter.
Smart OEM Alarm Control will behave like a standard Safelock feature on a remote starter. It will unlock at the
beginning of the sequence, and relock after start and shutdown.
Smart OEM Alarm Control will synchronize with the OEM alarm so that it will disarm and rearm the vehicle in
the remote start sequence, only when required. The reason for this is, factory alarm control must often be done
by lock or unlock operation. This could create unnecessary actions on door lock modules, such as the horn to
honk. When possible, Smart OEM Alarm Control will monitor the alarm and door lock status to detect if the
disarm or rearm is required. If the vehicle is unlocked or is not equipped with factory alarm, the disarm/rearm
will not be executed. Smart OEM Alarm Control will also monitor the remote starter actions so that the factory
alarm control is not done twice. A remote starter, for which the Safelock feature is active, will work perfectly with
this option and will make it invisible to the user.
(RSR)
Installation
using
the
EIPS
Description
configuration tool found on the module
and
RSR
; however, manual
© 2017 Directed. All rights reserved.
Rev.: 20170814
Page 10