Clarke 3400404 Instrukcja obsługi i konserwacji - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke 3400404. Clarke 3400404 18 stron. 225mm long reach drywall sander (230v)

Drukuj stronę

be performed. Use of the power tool for operations different from those

intended could result in a hazardous situation.

5) SERVICE

a. Have your power tool serviced by a qualified repair person using only

identical replacement parts. This will ensure that the safety of the power

tool is maintained.

SAFETY INSTRUCTIONS FOR KICKBACK

WARNING: KICKBACK IS A SUDDEN REACTION TO A PINCHED OR

SNAGGED ROTATING WHEEL, BACKING PAD, BRUSH OR ANY OTHER

ACCESSORY. PINCHING OR SNAGGING CAUSES RAPID STALLING OF THE

ROTATING ACCESSORY WHICH IN TURN CAUSES THE UNCONTROLLED

POWER TOOL TO BE FORCED IN THE DIRECTION OPPOSITE OF THE

ACCESSORY'S ROTATION AT THE POINT OF THE BINDING.

WARNING: KICKBACK IS THE RESULT OF POWER TOOL MISUSE AND/OR

INCORRECT OPERATING PROCEDURES OR CONDITIONS AND CAN BE

AVOIDED BY TAKING PROPER PRECAUTIONS AS GIVEN BELOW.

1. Maintain a firm grip on the power tool and position your body and arm to

allow you to resist kickback forces. ALWAYS use the auxiliary handle, if

provided, for maximum control over kickback or torque reaction during

start-up. The operator can control torque reactions or kickback forces, if

proper precautions are taken.

2. NEVER place your hand near the sanding pad. It may kickback over your

hand.

3. DO NOT position your body in the area where power tool will move if

kickback occurs. Kickback will propel the tool in the direction opposite to

the sanding pads movement at the point of snagging.

4. Use special care when working corners, sharp edges etc. Avoid bouncing

and snagging the sanding pad. Corners, sharp edges or bouncing have a

tendency to snag the rotating accessory and cause loss of control or

kickback.

DUST EXTRACTION

The dry wall sander is provided with a dust extraction facility. Please note

however, that this does not preclude the user from wearing a face mask to

prevent the inhalation of dust particles. All safety wear must be worn.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]