Clarke 6500560 Instrukcja obsługi i konserwacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke 6500560. Clarke 6500560 13 stron. 550w buffer/polisher

5. DO NOT overreach. Keep proper footing and balance at all times. This

enables better control of the tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

POWER TOOL USE AND CARE

1. DO NOT force the buffer/polisher. Use the correct accessories for your

application which will do the job better and safer at the rate which it was

designed.

2. DO NOT use the buffer/polisher if the switch does not turn it on and off. Any

power tool that cannot be controlled with the switch is dangerous and

must be repaired.

3. Disconnect the plug from the power source before changing accessories.

Such preventive safety measures reduce the risk of starting the buffer/

polisher accidentally.

4. Store idle tools out of the reach of children and DO NOT allow persons

unfamiliar with the buffer/polisher or these instructions to operate it. Power

tools are dangerous in the hands of untrained users.

5. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power

tool's operation. If damaged, have the buffer/polisher repaired before use.

Many accidents are caused by poorly maintained power tools.

6. Use the buffer/polisher and accessories in accordance with these

instructions and in the manner intended, taking into account the working

conditions and the work to be performed. Use of the buffer/polisher for

operations different from intended could result in a hazardous situation.

7. The performance of this tool may vary, depending upon variations in line

voltage. Extension cable usage may also affect performance.

SERVICING

1. Have your buffer/polisher serviced by qualified service personnel using

only identical replacement parts. This will ensure that the safety of the

power tool is maintained

BUFFER/POLISHER SPECIFIC WARNINGS

1. DO NOT get the buffer/polisher wet or use in damp or wet locations.

2. DO NOT switch the buffer/polisher on whilst the wheel is in contact with the

workpiece.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]