Aleko AC 2400 Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Otwieracz do bram Aleko AC 2400. Aleko AC 2400 16 stron. Sliding

· Built in motor running limitation: max. 90 sec

· Reliable electromagnetism limit for easy adjustment

· Can be equipped with a wide range accessories

Installation Overview

Caution:

*Be sure that the opener is installed in a level

and paralleled position and is properly secured.

Improper installation could result in property

damage, severe injury, and/or death.

* Before starting installation, ensure that there is

no point of friction during the entire movement

of the gate and there is no danger of derailment.

* Ensure that the safety side panels are present.

Necessary Tools: The following tools may be

necessary to install the Gate opener. You will need

screwdrivers, an electric drill, wire cutters and a wire

stripper, a socket set, and possibly access to a

welder.

When install the opener, you should build a concrete

pad to support the base plate of opener in order to

maintain proper stability.

The installation proceeds are as follows:

1.Dig a hole for a concrete pad which should be

approximately 60 x 32 x 35cm (24〞x 13〞x 14〞). It

may protrude 10 cm (4" ) above ground and 25 cm

(10" ) in depth underground. Increase the pad height