Clarke CP254 Instrukcja obsługi i konserwacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke CP254. Clarke CP254 13 stron. Electric car polisher
Również dla Clarke CP254: Instrukcja obsługi i konserwacji (13 strony)
Drukuj stronę
ASSEMBLY
WARNING: MAKE SURE THAT THE TOOL IS SWITCHED OFF AND
UNPLUGGED FROM THE MAINS SUPPLY BEFORE FITTING OR REMOVING
THE HANDLE OR BONNET.
ATTACHING THE BONNET
1. Place the bonnet over the
sponge pad so the pad is
completely covered.
2. Pull the draw string tight to ensure
the bonnet will not slip.
3. Tie the string and tuck the excess
back under the edge of the
bonnet to avoid it becoming
entangled.
NOTE: Replacement applicator +
polisher packs are available from your Clarke dealer part number
6462109Fitting the 'D' Handle
ADJUSTING THE HANDLES
1. Pull the handle away from the
main body as shown.
2. Twist the handle into the position
required.
NOTE: Do not force the handle,
remember the handle does
not rotate all the way round.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
6