Clarke EZ-8 07060A Instrukcja serwisowa - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Sander Clarke EZ-8 07060A. Clarke EZ-8 07060A 10 stron.

Switch Replacement

1-Remove three screws (44) from each side of the control housing (41)

2-Remove three screws securing the switch wires to the contactor

3-Remove switch retaining nut (33)

Contactor

1-Remove three screws (44) from each side of the control housing (41)

2-Disconnect all wires from the contactor (39)

3-Remove two screws (46) securing the contactor to the control housing

1-Remove three screws (44) from each side of the control housing (41)

2-Disconnect cord wires from the contactor and ground

3-Remove the strain relief retaining nut (42)

56043147

Page 2