Clarke Woodworker BS1 Instrukcja obsługi i konserwacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Sander Clarke Woodworker BS1. Clarke Woodworker BS1 4 stron. Belt sander
Również dla Clarke Woodworker BS1: Instrukcja obsługi i konserwacji (13 strony)
Drukuj stronę
Thank you for selecting this CLARKE Hand Held Belt Sander, which is designed for DIY use,
and for sandinig WOOD ONLY only.
Before attempting to use the machine, please read this leaflet thoroughly and follow the
instructions carefully. In doing so you will ensure the safety of yourself and that of others
around you, and you can look forward to the Sander giving you long and satisfactory
service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12 months from the
date of purchase. Please keep your receipt therefore, as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered with in
any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be returned to
us without prior permission.
This guarantee does not effect your statutory rights. Please note that backing pad is not
covered by this warranty.
SPECIFICATIONS
E
lec. Supply .................................... 230V 50Hz 1ph
Power Rating .................................. 900 Watts
Fuse Rating ..................................... 13 Amps
No Load Speed ............................. 380 M/min
Belt Size ........................................... 76x533mm
Sound Power Level ........................ 106dBL
Vibration Level ............................... >2.5m/
Weight ............................................. 3.7kg
This product conforms with the following directives:
98/37/EC, 73/23/EEC and 89/336/EEC
Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE
International reserve the right to change specifications at any time without prior notice.
PARTS & SERVICE
For Spare Parts and Service, please contact your nearest dealer, or CLARKE International,
on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or
e-mail as follows:
PARTS: [email protected]
SERVICE: [email protected]
WA
s
2
2
TROUBLE SHOOTING
Sander is overheating
This indicates the machine is dirty. Clean the ventilation holes, and blow
out with compressed air or a clean dry cloth.
Overloading the machine will also cause overheating. Do not use for heavy
duty work, and do not apply excessive pressure.
Excessive sparking occurs
This indicates worn brushes. This problem is quickly remedied but you should
consult your CLARKE dealer for parts and advice.
Sander does not operate when switched ON
Check to ensure the fuse is sound, and replace if necessary. If the fuse is
sound, or the blows repeatedly, consult your CLARKE dealer.
ACCESSORIES
The following sanding belts are available from your Clarke dealer.
40 Grit, pack of 10 ............... Part No. 6468040
60 Grit pack of 10 ................ Part No. 6468042
80 Grit pack of 10 ................ Part No. 6468044
120 Grit pack of 10 .............. Part No. 6468046
PARTS LIST
Item
Description
1
Dust Collector Bag
2
Motor Brushes
Part No.
TMCBS101
TMCBS102
7