Clarke CPE30A3 Instrukcja obsługi i konserwacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Pompa wodna Clarke CPE30A3. Clarke CPE30A3 17 stron. Water pump
Również dla Clarke CPE30A3: Instrukcja obsługi i konserwacji (16 strony)
Drukuj stronę
• WARNING:-DO NOT place any such obstruction on the suction side
(inlet Port) of the pump unless it is an isolator valve in a gravity fed
system. It is also IMPORTANT to note, that these pumps should not be
operated with the delivery valve completely closed.
• If there is any chance of freezing, protect the pump and pipework
with suitable lagging. The formation of ice may cause serious
damage.
IMPORTANT: The pump MUST NOT be connected to the mains supply until all
hose/pipe installation is completed. DO NOT RUN THE PUMP DRY
NOTE: If any part of the system is to be connected to the mains water
supply ensure that local water authority regulations are observed.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8