Directed Electronics Viper 550HF Instrukcja obsługi - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Alarm samochodowy Directed Electronics Viper 550HF. Directed Electronics Viper 550HF 20 stron.
Drukuj stronę
All manuals and user guides at all-guides.com
Arming While Driving
1
Your system can be armed while driving the vehicle! Simply
press Button I on your transmitter while the vehicle is running.
The system will chirp once and then once more to indicate
that the ignition is on. The system will not respond to any input
except the door triggers and the starter kill relay (if installed) will not be acti-
vated. Once you have reached your destination, the system must be disarmed
by pressing Button I on the transmitter once more. The siren will chirp twice
and the LED will stop flashing. If you do not disarm the system, it will trigger
when the any door is opened to exit the vehicle.
Disarming
1
To turn off, or disarm the system, press Button I again. You will
hear two chirps, and the parking lights will flash twice. If power
locks are controlled by he system, the doors will unlock. If the
siren chirps either four or five times when disarming, see Diag-
nostics section. This is called Tamper Alert.
High Security Disarm
1
Your system includes a High Security Disarm feature. During
the trigger sequence, using the transmitter to disarm the sys-
tem will only stop the trigger sequence (the siren will stop and
the parking lights will stop flashing). However, the system will remain armed
and the doors will stay locked. This is extremely useful if you must stop the
system from sounding, but are unable to check the vehicle visually. The trig-
ger will stop, but the vehicle will remain protected.
To disarm with the transmitter during a trigger, press Button I on your trans-
mitter. The siren will stop sounding. Next press Button I once more and the
system will chirp four or five times (reporting the trigger) and disarm.
Disarming Without a Transmitter
This feature allows you to disarm the system without the transmitter should it
be lost, damaged or disabled. In order to disarm without a transmitter, you
must have the vehicle's ignition key and know where the valet button is. Be
sure to check with the installer for the location of the Valet button.
6
© 1997 Directed Electronics, Inc.