Directed Electronics 440HP Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zdalny rozrusznik Directed Electronics 440HP. Directed Electronics 440HP 19 stron. Directed electronics remote start alarm system owner's guide 440hp

Drukuj stronę

To lock/arm using your remote

➤

To arm the system press

connected). The LED will begin to flash. The Failsafe® Starter Kill will

prevent the vehicle's starter from cranking if it has been installed. The vehi-

cle's horn (if connected) will honk and the parking lights will flash once to

confirm arming of the system.

To unlock/disarm using your remote

➤

To disarm the system press

connected). The Failsafe

horn (if connected) will honk twice and the parking lights will flash twice.

Disabling the Failsafe

➤

Turn on the ignition. Press and release the Valet

The LED will stop flashing and the vehicle should start.

To enter or exit Valet

➤

Turn the ignition to the ON position. Turn the ignition back off. Press and

release the Valet

if you have entered Valet

The LED will turn off when exiting Valet

To activate Panic Mode

➤

Press and hold

To exit Panic Mode

Press

on the transmitter.

➤

Location of Valet Switch___________________________________

QUICK REFERENCE GUIDE

for one second. The doors will lock (if

for one second. The doors will unlock (if

Starter Kill will be deactivated and the vehicle's

Starter Kill without a transmitter

Mode

switch within 10 seconds. The status LED will light steadily

Mode. To exit Valet

for 2 seconds.

switch within 10 seconds.

Mode, repeat the steps above.

Mode.