Directed Electronics Honda/Acura SIRIUS Interface HON-SC1 Instrukcja instalacji - Strona 5

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria samochodowe Directed Electronics Honda/Acura SIRIUS Interface HON-SC1. Directed Electronics Honda/Acura SIRIUS Interface HON-SC1 20 stron. Sirius interface honda/acura
Również dla Directed Electronics Honda/Acura SIRIUS Interface HON-SC1: Instrukcja instalacji (20 strony)

Drukuj stronę

Directed Electronics Honda/Acura SIRIUS Interface HON-SC1 Instrukcja instalacji

Warning and Safety Information

Caution

Please read these instructions carefully before proceeding. Failure to follow these safety instructions and warnings may

result in a serious accident and/or personal injury.

•

HALT USE IMMEDIATELY IF A PROBLEM ARISES. Failure to do so may cause personal injury or damage to the

product. Return the unit to your authorized retailer or nearest service center for repairing..

•

ENSURE THE WIRING UPON INSTALLATION IS NOT CRIMPED OR PINCHED BY SCREWS OR SHARP METAL

EDGES. Route the cables away from moving parts or sharp pointed edges. This will prevent crimping and damage

to the wiring. If the wiring must pass through a metal hole, be sure to use a rubber grommet to prevent the wire's

insulation from being cut by the metal edge of the hole.

•

USE ONLY THE SPECIFIED PARTS AND INSTALL THE PRODUCT SECURELY. Be sure to use only the specified

accessory parts. Use of nonspecified parts may damage this unit internally or may not securely install the unit in

Bank and

Tune mode

present

place. This may cause parts to become loose, resulting in hazards or product failure.

indicator

Sat mode,

•

USE CAUTION IF or WHEN DISCONNECTING THE BATTERY TERMINAL. Please consult the vehicle's owner's

bank selector

manual or a service technician prior to removing the battery positive or ground connection, as it may cause dam-

age to the vehicle's electrical system or require reprogramming of the vehicle's computer-controlled devices.