Alemite 7261 Instrukcja serwisowa - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Kable i złącza Alemite 7261. Alemite 7261 5 stron. Cord reel with rv plug
Drukuj stronęSER 7261
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING, OR SERVICING THIS EQUIPMENT
ELECTRICAL INFORMATION
CORD APPARATUS
RV Plug
Frequency 60HZ single phase
DIMENSIONAL DATA
Four 5/16" (7.9 mm) diameter mounting holes
Fig. 1
Alemite, LLC
1-800-548-1191-http://[email protected]
IMPORTANT
VOLTAGE
A/C
AMPS
35
120
PERSONNEL SAFETY
Personal injury and/or equipment damage may
result if proper safety precautions are not observed.
• Ensure that only a qualified electrician installs/services this
equipment.
• Ensure that power supply voltage does not exceed maxi-
mum voltage rating of reel.
• Ensure that reel is properly installed before connecting to
power supply.
• Ensure that all electrical power is removed from reel be-
fore servicing.
• A high-tension spring assembly is contained within the
reel. Exercise extreme caution.
• Check for frayed and/or broken wires before each use.
Pull electrical cord from reel by grasping the electrical
cord itself, not the work device.
• If an electrical malfunction should occur, remove
power from reel immediately.
• Ensure that reel, electrical cord, and equipment being ser-
viced are properly grounded. Use an ohmmeter to check
ground continuity.
• If reel ceases to unwind or rewind, remove power
immediately. Do not pull or jerk on electrical cord!
• Treat and respect the reel as any other piece of machinery,
observing all common safety practices.
WARNING:
Even low voltage can cause irreparable damage or
death! Exercise extreme caution while operating or
servicing this equipment.
2
Revision (6-05)