Directed Electronics Viper Audio d300.1 Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz samochodowy Directed Electronics Viper Audio d300.1. Directed Electronics Viper Audio d300.1 16 stron. Directed electronics audio d300.1 owners manual
Drukuj stronęSPECIFICATIONS
RMS continuous power driven into 4 ohms from
20 to 250 Hz with less than 0.4% Total
Harmonic Distortion @ 14.4 VDC
RMS continuous power driven into 2 ohms
from 20 to 250Hz with less than 0.6% Total
Harmonic Distortion @ 14.4 VDC
Dynamic power rating (IHF-202 Standard) at
minimum load
Signal-to-Noise Ratio
Frequency Response
Damping Factor
Crossover
Bass Equalization
Input Impedance
Input Sensitivity
Output Impedance
Supply Voltage
Fusing and Power
Minimum Cable Requirements (AWG)
(Per amp, trunk mounted)
© 2002 Directed Electronics, Inc
Viper model
300.1
200 watts
300 watts
350 watts
Greater than 80 dB
20-250 Hz +0, -1 dB
50 (typical)
Low-pass 12 dB/ octave
variable from 30 to 250 Hz
Switchable +8 dB,
centered at 40Hz
20K ohms
Variable from 150 mV to 8 volt
2 to 4 ohms
10 to 16 VDC
25A
#12
13