CTEK CHARGESTORM CONNECTED 2 Podręcznik użytkownika - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Ładowarka do akumulatorów samochodowych CTEK CHARGESTORM CONNECTED 2. CTEK CHARGESTORM CONNECTED 2 19 stron.
Również dla CTEK CHARGESTORM CONNECTED 2: Podręcznik użytkownika (20 strony)
Drukuj stronę
3.
Back cover.
4.
Technical box.
5.
Electrical Vehicle outlet.
6.
Electrical Vehicle outlet (fixed cable).
Status symbols
SYMBOL
COLOR
MODE
EXPLANATION
Open
RFID symbol not active.
Solid green
RFID
Waiting for RFID tag.
Flashing
RFID
Authentication in progress. Please wait!
Yellow
Flashing
RFID
RFID tag approved. Charging will now
Green
start.
Flashing
RFID
RFID tag access denied (user not
red once
authorized for charging).
Solid green
RFID/
Available and ready for charging.
Open
Flashing
RFID
Waiting for cable connection or
green
authentication.
Solid Blue
RFID/
Vehicle connected but not charging (for
Open
example, the vehicle is fully charged or
the charging session is paused).
Flashing
RFID/
Charging in progress.
Blue
Open
CTEK E-Mobility AB
SYMBOL
COLOR
MODE
EXPLANATION
Solid Red
RFID/
Alarm active. Most likely a fuse has
Open
tripped. Open the technical box and
reset the fuse.
Outlet has a temporary fault. The fault
could be one of the following:
• Time limit for authentication reached.
• PP-signal cannot be read from cable
(Only applicable for type 2 outlet).
• Outlet motor could not lock cable.
Solid Blue
-
The charging station has connected to
cloud backend. Only displayed during
boot up. The flashing will take place for
5 seconds.
Solid Red
RFID/
The charging station has failed to
Open
connect to the cloud backend during
start up. Only displayed during boot up.
NOTE: If the charging station has no active symbols, the charging station is
inactive. This may be because it has been configured in that way, because
the charging station is restarting, or because the charging station has been
deactivated for planned maintenance.
User & installation instructions
3