Acorn DC-368H Instrukcja obsługi - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wentylator Acorn DC-368H. Acorn DC-368H 16 stron.
Drukuj stronę
INSTALLATION OF LIGHTKIT:
1)
Remove one screw from the motor round piece, unscrew the other two
screws out by 3 to 4mm.
2)
A�ach the lightkit to the fan, fix the first screw back to the hole and �ghten
all the three screws firmly (fig 11).
3)
Direct plug in the wire to the lightkit docking/connector (fig 12)
*skip this step if using decora�ve cover.
4)
A�ach the acrylic cover / decora�ve cover to the lightkit and twist clockwise
un�l its secured �ghtly (fig 13).
DC-368H
INSTALLATION OF HANGING PLATE:
9
fig 11
fig 14
fig 12
1)
To use four Expansion Setscrew to
install the Hanging Plate (fig 14).
*AC wires must pass through the
hanging plate center hole.
2)
Install the 'J' hook onto the
concrete and fastened firmly.
fig 13