Clarke Woodworker CMS251 Instrukcja obsługi i konserwacji - Strona 14
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Piła Clarke Woodworker CMS251. Clarke Woodworker CMS251 19 stron. Compound mitre saw
Drukuj stronę
4.
Remove the screw securing the upper
plastic guard, arrowed in Fig.11, and pull
away the guard.
5.
Unscrew and remove the Blade securing
screw using the claw and box spanners
provided, taking great care to avoid
damaging your hand on the saw blade
teeth.
IMPORTANT: The securing screw has
a LEFT HAND THREAD, i.e. turn it
CLOCKWISE to undo.
6.
Remove the outer flange followed by
the blade. If necessary give the blade a
gentle tap to dislodge it from the inner
flange.
7.
Reassemble in reverse order, ensuring
the tips of the blade point downwards
at the front, as shown in Fig. 13.
Hints and Tips.
1.
When replacing the upper plastic blade guard (para 4 above), take care
not to overtighten the securing screw.
2.
To replace the Lower Blade Guard Bracket (para.2 above), centralise the
guard about the blade, then position the bracket so that screw 'A' engages
with the slotted hole in the bracket. Tighten screw (A). Using the screw as a
pivot move the bracket until the other screw hole, in the Upper Blade Guard,
and the hole in the bracket are aligned. Enter the screw and tighten.
14
Fig.11
Fig.12
Fig.13