Clarke 6931008 Instrukcja obsługi i konserwacji - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Grzałka Clarke 6931008. Clarke 6931008 17 stron. Diesel/paraffin heaters
Również dla Clarke 6931008: Instrukcja obsługi i konserwacji (17 strony)
Drukuj stronę
PREPARATION
FUEL TYPES
Diesel or paraffin are the only fuels that should be used in this heater.
FILLING THE FUEL TANK
IMPORTANT: Before filling the fuel tank the first time or after extended
storage periods, drain the fuel tank of any moisture or condensation.
1. Follow all of the "Safety Precautions".
2. Remove the fuel cap.
NOTE: If you lose the fuel cap a
replacement must be
obtained before use, this is
available from your local
Clarke service department
part number GF0K070000.
3. Fill the fuel tank with clean diesel
or paraffin.
• In cold weather, condensation
may develop in the tank if the tank is empty and it is recommended
that a tablespoon of de-icer be added for each gallon of fuel in the
tank.
• When filling the heater, make sure that the heater is level and do not
overfill. Use a funnel or can with a long fill spout.
• Fill with a minimum of 5 litres for the XR60B, 6 litres of fuel for the XR80
& XR110, or 10 litres the XR160 and XR210.
HEATER LOCATION
• Locate heater at a safe distance from combustible materials.
• When used, the heater should rest on suitable insulating material at
least 1 inch thick and extending 3 ft. or more beyond the heater in
all directions.
• Only operate on a flat level and stable surface.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8