Clarke 6939000 Instrukcja obsługi i konserwacji - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Grzałka Clarke 6939000. Clarke 6939000 13 stron. Infrared wall heaters

OPERATION

1. Connect the mains cable to a suitable power socket.

2. Pull the string to repeatedly to

cycle through the following

settings:

CFI1800

• O = Off

• I = Heater elements on

CFI1800L

• O = Off

• I = Lamps only

• II = Heater elements on/lamps off

• III = Heating elements and lamps both on

WARNING: BEFORE CARRYING OUT ANY MAINTENANCE, ENSURE THE

HEATER IS SWITCHED OFF, DISCONNECTED FROM THE MAINS SUPPLY,

AND HAS BEEN GIVEN ADEQUATE TIME TO COOL DOWN.

PERIODICALLY

1. If there is any serious build up of dirt, wipe thoroughly with a damp cloth.

Take care that no moisture enters the heater.

2. Inspect the power cable for damage. Undue heat will cause the cable to

stiffen and crack, in which case it should be replaced.

3. Ensure heating elements are free of dust (use compressed air to clean if

possible. (Always wear a dust mask if performing this operation).

4. Refer to your Clarke dealer if the heater element or LED lamp need

replacing.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]