LEGO Winter Toy Shop LED Instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria oświetleniowe do domu LEGO Winter Toy Shop LED. LEGO Winter Toy Shop LED 20 stron. Lighting kit
Drukuj stronę
Connecting cable connectors to Expansion Boards
Take extra care when inserting connectors to ports of Expansion Boards.
Connectors can be inserted only one way. With the expansion board facing
up, look for the soldered "=" symbol on the left side of the port. The
connector side with the wires exposed should be facing toward the soldered
"=" symbol as you insert into the port. If a plug won't t easily into a port
connector, do not force it.
WARNING: Incorrectly inserting the connector
can result in bent pins inside the port or
possible overheating of the expansion board
when connected.
Installing Bit Lights under LEGO® bricks and plates.
When installing Bit Lights under LEGO® pieces, ensure they are placed the
correct way up (Yellow LED component exposed). You can either place them
directly on top of LEGO® studs or in between.