Clarke XR105 Instrukcja obsługi i konserwacji - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Grzałka Clarke XR105. Clarke XR105 8 stron. Paraffin/diesel heaters
Również dla Clarke XR105: Instrukcja obsługi i konserwacji (20 strony)
Drukuj stronę
Thank you for purchasing this CLARKE, Paraffin fired Space Heater.
This range of portable heaters is designed for industrial applications only. As with
all mechanical equipments, optimum performance will only be achieved if the
correct application and servicing procedures are followed. Please read this
leaflet thoroughly and follow the instructions carefully before attempting to use
the heater. In doing so you will ensure the safety of yourself and that of others
around you, and you can look forward to it giving you long and reliable service.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase, no product can be
returned to us without prior permission. This guarantee does not effect your
statutory rights.
CONTENTS
Safety Precautions ........................................................................ 3
Electrical Connections ................................................................. 4
Unpacking ..................................................................................... 5
Assembly ........................................................................................ 6
Operation ...................................................................................... 6
Starting Procedure ........................................................................ 8
Parts & Service ............................................................................... 8
Maintenance ................................................................................ 9
Storage ........................................................................................... 10
Specifications ................................................................................ 11
Parts Diagram ................................................................................ 12
Parts List .......................................................................................... 13
Trouble Shooting ........................................................................... 15
PAGE
2
TROUBLE-SHOOTING
FAULT
CAUSE
Motor does not start
1. No power
2. Faulty Motor/Capacitor
3. Lock out of appliance
due to overheating.
4. Internal Fuse Blown
Motor runs, but the
1. Empty fuel tank, dirty or
heater does not ignite.
wrong fuel.
2. Fuel filter clogged
3. Air leaks in fuel line
4. Burner nozzle Clogged
5. Oil viscosity increased due 5. Mix with 10-20% paraffin.
to low temperature.
Flames emitted from
1. Insufficient air flow into
Air Outlet
combustion chamber.
2. Pump pressure too high.
Heater starts normally, 1. Dirty photocell
but flame-out control
system shuts off the
2. Faulty photocell
3. Defective connection
between photocell and
flame-out control
4. Faulty flame-out control
REMEDY
1. Check power supply, power
cable and fuse, and replace
if necessary. Check External
Thermostat if fitted.
2. Check and if necessary,
replace
3. Detect cause of overheating.
Check air inlet and outlet.
Wait for 5 minutes, and
restart. If condition persists
contact your Clarke dealer
4. Check an replace fuse
1. Drain dirty or wrong fuel,
clean filter and fill with clean
paraffin or equivalent.
2. Clean or replace fuel filter
3. Check pipes, tighten
connections, if necessary
replace pipe.
4. Clean nozzle with compressed
air. Replace if necessary
1. Check air inlet is not blocked.
Check fan is not damaged
and is operating correctly.
2. Check air pump pressure,
and reduce to nominal value.
1. Check photocell and ensure
it acknowledges the flame.
(Contact your Clarke dealer)
2. Replace photocell.
3. Check, and connect
properly.
4. Check and replace if
.
necessary
15