Clarke 1801454 Instrukcje użytkowania - Strona 3

Przeglądaj online lub pobierz pdf Instrukcje użytkowania dla Narzędzia Clarke 1801454. Clarke 1801454 3 stron. Coil spring compressor set

METHOD OF USE

Select the appropriate claws to suit the coil spring, and attach to the screw clamp,

securinjg with the hex. socket head screws, using the hex. socket wrench provided.

Spare screws are also provided if required.

Turn the clamp nut on the end of the

clamp, (see Fig.1) to position the claws

so that they may be inserted between

the coils as shown, ensuring the coils bed

into the claws fully.

Continue to turn the clamp nut so that the clamp assembly is firmly attached to

the coill spring assembly, then attach the complete unit to a table top using the

clamp provided, as shown in Fig.2.

Once secured, turn the clamp nut to bring the claws together, thereby compressing

the coils. Eventually, pressure on the shock absorber securing nut will be completely

relieved, detected when the nut turns easily. WARNING! DO NOT turn the nut until

this condition exists.

With the nut removed, the shock absorber may be withdrawn

Turn Clockwise

to bring claws

together