Clarke 6500411 Instrukcja obsługi - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Narzędzia Clarke 6500411. Clarke 6500411 13 stron. 12” disc sander

TO STOP THE DISC SANDER

1. Press the RED STOP button marked

'O' and wait for the disc to stop

completely before removing any

dust.

• Take care, the disc may take

some time to come to a full

stop.

• If required, press the brake on

top of the disc sander to help

slow the disc.

If the angle is critical, a mitre gauge

should be used between the table

and disc to ensure accuracy. For

right angles, simply slide a square on

the table, up to the disc, and adjust

accordingly. The angle should be

correct when slight pressure is placed

on the table.

For greater accuracy, the mitre

gauge is used so that the work may

be held at a required angle and

moved across the disc as shown.

Use a slight pressure ONLY... let the

disc do the work. Pressure should be

on the DOWNWARDS direction of

motion of the disc ONLY. i.e. on the

left half of the disc as shown.

NOTE: Applying the workpiece to

the right hand side of the

disc may cause kickback.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]