Clarke 6500958 Instrukcja montażu - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja montażu dla Narzędzia Clarke 6500958. Clarke 6500958 4 stron. 3 in 1 roller stand

ADJUSTMENTS

ADJUSTING THE HEIGHT

1. Rotate the handle anticlockwise until

it is loose.

2. Lift the roller head to the desired

height.

• Minimum height is 700 mm

• Maximum height is 1100 mm

3. Rotate the handle clockwise to lock

the roller into position.

MAXIMUM WEIGHT CAPACITY

The weight capacity of this unit varies according to the height of the roller.

• Height is set to minimum

• Height is set to mid way

• Height is set to maximum

USING THE ROLLER STAND

When feeding the workpiece over the

roller stand, always feed it from the rear

of the stand as shown on the right, this

will increase the stability of the stand.

CONFIGURATION

There are 3 configurations in which you

can use this roller stand, simply rotate the

head to the required configuration.

ROLLER CONFIGURATION:

Allows the workpiece to be moved

along one plane

BALL ROLLER CONFIGURATION:

Allows the workpiece to be moved

along two planes

STAND CONFIGURATION:

Provides basic support of the workpiece

Handle

Maximum load = 90 kg

Maximum load = 60 kg

Maximum load = 45 kg