Clarke CAT33B Instrukcja obsługi i konserwacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Narzędzia Clarke CAT33B. Clarke CAT33B 13 stron.
Również dla Clarke CAT33B: Instrukcja obsługi i konserwacji (4 strony)
Drukuj stronę
When not in use, disconnect from air supply, clean and store in a safe, dry
place.
ACCESSORIES
Multi-purpose grease (high melting point Lithium based), 400g cartridge;- part
no 3050875 is available from your Clarke dealer.
A wide range of airline accessories is available including filter/regulators,
lubricators, high-pressure hoses (5 to 50 metres) etc.
Contact your Clarke dealer for further information or Clarke International
Service Department on 01992 565333.
TROUBLESHOOTING
SYMPTOM
Grease gun fails to work
or is slow.
Gun will not shut off.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PROBLEM
Air pockets in the gun
Air hose leaks.
Low air pressure.
Plunger is sticking.
Cartridge is empty
Grease gun is too cold. The gun needs to be at
O-rings damaged or ill-
fitting in seat.
9
SOLUTION
Draw back the plunger
handle fully and release by
pressing the handle
release. Repeat several
times. This will help to move
the rubber ring into the car-
tridge tube, which essential
for the grease gun to work.
Push the plunger handle all
the way in.
Press the air vent valve
several times to free the air.
Tighten and seal hose
fittings with teflon tape.
Adjust compressor
regulator to 90 psi.
Lubricate plunger.
Refill the container tube.
room temperature(65-80
Return to Clarke dealer for
repair.
o
F)