Clarke CMFT250 Instrukcja obsługi i konserwacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja obsługi i konserwacji dla Narzędzia Clarke CMFT250. Clarke CMFT250 20 stron. Multi function tool kit

BEFORE USE

WARNING: ENSURE THAT THE TOOL IS SWITCHED OFF AND UNPLUGGED

FROM THE MAINS SUPPLY BEFORE FITTING OR REMOVING THE

ACCESSORIES OR HANDLE.

FITTING THE SIDE HANDLE

1. If required, screw the side handle

onto the body of the tool.

NOTE: The handle can be fitted for

left or right handed use as

required. Choose the most

appropriate position for user

comfort and the task in

hand.

FITTING THE ACCESSORIES

The multi-function tool should be

supplied with the retaining disc held

in place by the retaining screw.

NOTE: The drive spindle has four

accessory locating pins as

shown.

1. Remove the retaining screw using

the hex key supplied, and lift

away the retaining disc.

2. Position your chosen accessory

on the drive spindle, ensuring that

the locating pins engage with the

corresponding holes in the

accessory and that the accessory

lays flat on the spindle.

3. Replace the retaining disc,

ensuring that the flat face is in

contact with the accessory, and

secure in place with the retaining

screw.

NOTE: All accessories are fitted in this way.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

Retaining screw

Retaining disc

Accessory

locating pins

Drive Spindle