Claro GLIDER DC Instrukcja instalacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Wentylator Claro GLIDER DC. Claro GLIDER DC 17 stron.

Issue

Fan does not start after

the pairing process

Fan keeps beeping, but

will not start

Fan wobbles

Fan makes a clicking

sound

FUNCTIONS OF THE REMOTE CONTROL

Possible Cause

Remote and receiver are not

paired successfully

Battery flat in remote control

Loose wire connections or

plugs to fan/receiver

No power goes into the fan

Loose wire connections or

plugs to fan/receiver

Screws on down rod are not

tightened

Blades are not balanced

Coupling cover does not sit

securely on motor housing

Rubber ring on coupling cover

is removed

Suggested Remedy

Re-pair the receiver and remote

Replace the battery in remote control

Check wire connections and ensure plugs are

positively connected

Check RCD/Switch board and wiring on

premises

Check wire connections and ensure plugs are

positively connected

Retighten the screws on down rod

Use the balancing kit to balance the blades.

Adjust coupling cover and ensure it sits

properly on the motor housing

Check couple cover and ensure there's a

rubber ring on the top of the cover.