Clarus DUET Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Zasilanie Clarus DUET. Clarus DUET 13 stron.
PACKAGE CONTENTS
(1) Clarus Duet
(1) Installation & Operation Guide
INSTALLATION OVERVIEW
The following is an overview for installing your Power Manager product.
Unpack all of the contents of the Clarus Duet carton. Inspect for shipping damage.
•
•
Plan your system and lay out all of the equipment that will be connected to the Clarus Duet.
Place the Clarus Duet in the location where it will be used, being sure to follow both the safety precautions listed in
•
the front of this manual. DO NOT plug the unit in yet.
Plug each of the components into the Clarus Duet. Be sure that the plugs are fully seated as this helps to protect
•
the connections from atmospheric contamination as well ensuring full contect. You may want to make a note on
paper listing the components that are connected to each outlet.
•
With all of the attached components in the OFF position, plug the Clarus Duet into the wall.
•
Turn the power switch to ON.
PLANNING YOUR SYSTEM
Think about which components need to work together, and place them in close proximity to one another. Be aware of
those products that generate the most heat and understand that excessive heat adversely affects your components.
Place them accordingly – allowing sufficient ventilation. You may also want to consider putting frequently handled
components in the most convenient locations. By carefully planning the system's architecture in advance, your Clarus
Duet can be integrated into any configuration you choose.
PLACEMENT
It is recommended that the Clarus Duet be placed in the same location as your other audio components so it can be
easily reached when manually operating the other controls in the system. Since this was designed for mono block
amplifiers we suggest that it sit on the floor between the amplifier and the wall outlet. There should be a clear line of
sight between the operator and the unit to allow easy user feedback of system status. The Clarus Duet should be
placed on a flat, stable and uncluttered surface.
CLARUS DUET Owner's Manual
©2019 Gordon J Gow Technologies, Inc. All rights reserved
6448 Pinecastle Blvd. Suite 101, Orlando FL 32809
Page 7
www.claruscable.com