Clarus Technologies PCS-25 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Sprzęt czyszczący Clarus Technologies PCS-25. Clarus Technologies PCS-25 14 stron. Cleaning stations
Również dla Clarus Technologies PCS-25: Instrukcja obsługi (16 strony)
Drukuj stronę
2. Place the Parts Washer in working area with a forklift or pallet jack with front of
unit facing out.
3. Use front leveling feet to reduce any rocking from an uneven floor. The leveling
feet should not be used to raise the unit off the floor. Use Bubble level to level
Front/Back and Left/Right.
D.
Fill Unit with Solvent
1. Once the unit is set in place, leveled and plugged in, you can fill it with solvent.
PCS-15 Parts Cleaning Stations require 17.5 gallons of solvent. PCS-25 and
WCS-25 Parts Cleaning Stations require 27.5 gallons of solvent. (NOTE! Fill
Parts Washer until fluid level gauge located on front, left corner reads full.)
2. Make sure both the cleaning bush and fluid nozzle are inside the tank before
turning the system on. Turn system on by depressing green "ON" button.
3. When unit automatically shuts off (approximately 4 minutes) check fluid level
and fill to full line.
Congratulations – your unit is ready!
VI.
PARTS DESCRIPTION & OPERATION
A.
On-Button.
To turn the Parts Washer on, simply depress the green "ON" switch once. This will turn
the system on for a 4-minute cycle. When the cycle is over the system will shut off
automatically. If continued operation is needed, simply depress the green "ON" button
again.
B.
Light Switch.
The light switch on the control panel operates the overhead 150-watt halogen light. The
light does not automatically switch off, so the operator must manually turn the light off.
C.
Cleaning Brush.
This ergonomically designed Parts Cleaning brush self cleans during use.
D.
Optional Equipment.
The PCS-25/WCS-25/PCS-15 Cleaning Stations come with various options. The
following describe the operation of these options, however, not all units are equipped
with the same option packages.
Air Tool with Air Pump:
8