DirekTronik 20102284 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przełącznik matrycowy DirekTronik 20102284. DirekTronik 20102284 11 stron. 4x4 hdmi 2.0 matrix
Drukuj stronę
8. EDID Management
EDID mode:Build-in EDID(default),Copy EDID.
There are 8 kinds of EDID groups switch for each input:
groups
EDID
0001
0010
0011
Input1 + Input2 flickering
0100
0101
Input1 + Input3 flickering
0110
Input2 + Input3 flickering
0111
Input1 + Input2 + Input3 flickering
1000
Operation steps:
1. Change EDID for input1:long press (about 1s) button in output1 area,enter EDID mode for
modification,input1/2/3/4 indicators in output1 area will start flickering,please refer to above table for
EDID instruction,for example,if input1 flickering only,it represent current EDID is"
4K60HZ-YUV444-8bit/2CH
button in output1 area again,exit EDID mode.
2. Change EDID for input2:long press (about 1s) button in output2 area,enter EDID mode for
modification,input1/2/3/4 indicators in output2 area will start flickering,then same operations to EDID
change of input1.
3. Change EDID for input3:long press (about 1s) button in output3 area,enter EDID mode for
modification,input1/2/3/4 indicators in output3 area will start flickering,then same operations to EDID
change of input1.
4. Change EDID for input4:long press (about 1s) button in output4 area,enter EDID mode for
modification,input1/2/3/4 indicators in output4 area will start flickering,then same operations to EDID
change of input1.
EDID switching sequence:Build-in EDID
5. Or you can wait 10s without any operation,automatically save the setup and exit EDID Mode.
Indicator status
Input1 flickering
Input2 flickering
Input3 flickering
Input4 flickering
",short press this button will switch to next EDID,long press (about 1s)
Copy EDID
7
Operating Instruction
EDID instruction
Def1：4K60HZ-YUV444-8bit/2CH
Def2：4K60HZ-YUV420-8bit/2CH
Def3：4K30HZ-YUV444-8bit/2CH
Def4：1080P-YUV444-8bit/2CH
Copy output1
Copy output2
Copy output3
Copy output4
Def1：