CLAS HU 0180 Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt serwisowy CLAS HU 0180. CLAS HU 0180 16 stron. 24l suction and 80l waste drainer

HU 0139

HU 0149

Then open the valve of the oil suction pipe (6). The used oil will fi ll inside the funnel.

You can see the capacity of the funnel on the sticker on the funnel glass. Do not exceed the

capacity of the funnel (HU 0159).

Insert the oil suction

probe.

Funnel glass

Valve

After the oil has been drawn in, to remove the used oil from the funnel, open the valve (7), which

is located under the funnel.

Warning! Warning!

Before opening the valve (7), check the tank. If there is air pressure in the tank, open the (8) and

release the air pressure.

• When the funnel is completely fi lled, never give air pressure to the funnel. Otherwise, the used

oil can be extracted from the plastic of the silencer.

• When the funnel is completely fi lled

with oil, be careful to transport it on fl at

ground or it may come out of the plastic

of the muﬄ er.

In this case, remove the plastic from the

muﬄ er and apply air pressure to the

funnel. And then clean up the part as in

the picture.

HU 0159

Mount the oil suction hose on

the oil suction probe.

The capacity of the funnel may be

diﬀ erent depending on the model.

HU 0180

Open the valve on the oil

suction pipe and complete the

oil suction process (HU 0159).