CLAS HU 0185BL Podręcznik - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla Sprzęt serwisowy CLAS HU 0185BL. CLAS HU 0185BL 12 stron. 25l waste oil drainer

HU 0185BL

25L WASTE OIL DRAINER

INTRODUCTION

Field of application

Professional-quality oil changers, suitable for the disposal of used oil from motor vehicles. The oil can

be discharged into the drainer by gravity or by pneumatic suction. Sturdy castors make it easy to

maneuver in the garage or workshop.

Specifications

- tank height: 470mm

- tank drain hose 1400mm

- suction hose 1400mm

- 3 flexible probes: Ø8; Ø6; Ø5 / L: 910mm

- 2 rigid probes: Ø6; Ø8 / L: 700mm

- case for probe L 680mm

- mano: from 0. 2b to -1b

- venturi system

- power supply: 6 to 8bar

- power supply for tank emptying: 1bar

Max- level indicator

Handling and storageHowever, care must be taken when handling and lifting. Dropping this machine

will affect accuracy and may also result in injury. This machine is not a toy and must be treated with

respect.the environment will have a negative effect on its operation if you are not careful. If the air is

humid, components will rust. If the machine is not protected from dust and debris, the components

will foul: and if it is not cleaned and maintained correctly or regularly, it will not operate at optimum

efficiency.

HEALTH AND SAFETY INFORMATION

General safety instructions

Warning : Be sure to read and understand these instructions carefully before using this equipment.

Be sure to comply with health and safety rules, local regulations and general shop rules when using

this equipment.Be sure to familiarize yourself with the process and all the limitations of oil drainers,

as well as their potential hazards.

Warning: Make sure oil drainers are disconnected from the air supply before replacing them.

• Keep the drainer in good working order.Replace or repair all damaged parts. Use only genuine

replacement parts. Keep the work area clean and tidy, and ensure that there is adequate lighting.

Keep oil changers clean for efficient and safe performance.

•Maintain correct balance and posture when using oil changers.Make sure the floor is not slippery,

and wear non-slip shoes in case of oil spillage.

Warning: When extracting high-temperature oils, ensure that your hands, face and body are well

protected using appropriate personal protective equipment (PPE).

• DO NOT extract caustic or flammable liquids when using oil drainers.

• Ensure that children and unauthorized persons are kept away from the work area. Warning : Ensure

that the correct air pressure is maintained and does not exceed