Lenovo ThinkCentre M91p Podręcznik konfiguracji - Strona 26
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Pulpit Lenovo ThinkCentre M91p. Lenovo ThinkCentre M91p 38 stron. Intel active management technology configuration guide
Również dla Lenovo ThinkCentre M91p: Specyfikacje (5 strony), Podręcznik wdrażania (34 strony), Zawiadomienie (6 strony)
Drukuj stronę
• Host Initiated – Displays whether the setup and configuration process was initiated by the host: No
indicates the setup and configuration process was not initiated by the host; Yes indicates the setup and
configuration process was initiated by the host. (PKI only)
• Hash Data – Displays the 40-character certificate hash data. (PKI only)
• Hash Algorithm – Describes the hash type. Currently only SHA1 (Secure Hash Algorithm 1) is supported.
(PKI only)
• Is Default – Displays Yes if the Hash algorithm is the default algorithm. Displays No if the hash algorithm
is not the default algorithm. (PKI only)
• FQDN – Displays the FQDN of the provisioning server mentioned in the certificate. (PKI only)
• Serial Number – Displays the 32-character Certificate Authority serial number.
• Time Validity Pass – Indicates whether the certificate has passed the time validity check.
RCFG
Select RCFG and press Enter. The INTEL(R) REMOTE CONFIGURATION window opens. Select Start
Configuration and press Enter. Press Y or N when you are prompted to activate the remote configuration.
Provisioning Server IPV4/IPV6
The Provisioning Server IPV4/IPV6 option enables you to enter the IP address of the Intel AMT provisioning
server and the port number of the Intel AMT provisioning server. The port number ranges from 0 to 65535.
The default port number is 9971.
Provisioning Server FQDN
Select Provisioning Server FQDN and press Enter. You will be prompted to enter the FQDN of the Intel
AMT provisioning server.
TLS PSK
Select TLS PSK and press Enter. The INTEL(R) TLS PSK CONFIGURATION window opens. The following
options will be displayed.
Set PID and PPS
Delete PID and PPS
TLS PKI
Select TLS PKI and press Enter. The INTEL(R) REMOTE CONFIGURATION window opens. The Remote
Configuration option is used to enable or disable the remote configuration. Enabling or disabling remote
18
ThinkCentre M91p Intel Active Management TechnologyConfiguration Guide
Option
Description
Used to enter the Provisioning ID (PID) and Provisioning
Pre-shared Key (PPS). The PID and PPS should be entered
in the dash format (for example, 1234-ABCD for PID and
1234-ABCD-1234-ABCD-1234- ABCD-1234-ABCD for
PPS).
Notes:
1. A PPS value of
0000-0000-0000-0000-0000-0000-0000-0000 will
not change the setup configuration state. If this
value is used, the setup and configuration state will
stay as Not-started.
2. Setting the PID/PPS will cause a partial unprovision if
the setup and configuration is In-process.
Used to delete the current PID and PPS stored on the
Intel ME.
Note: Deleting the PID and PPS will cause a partial
unprovision if the setup and configuration is In-process.