Lenovo ThinkCentre M92z Podręcznik konfiguracji - Strona 18
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Pulpit Lenovo ThinkCentre M92z. Lenovo ThinkCentre M92z 38 stron. Intel active management technology configuration guide
Drukuj stronę
Local FW Update
Power Control
The Power Control menu enables you to configure the ME power control policies. To conform with the
ENERGY STAR program and the EuP Lot 6 requirements, the Intel ME can be turned off in various sleep
states. Select Power Control and press Enter. The INTEL(R) ME POWER CONTROL window opens. In the
INTEL(R) ME POWER CONTROL window, the following options will be displayed.
Intel(R) ME ON in Host Sleep States
Idle Timeout
1.
M-off: An Intel ME FW power state when the Intel ME FW is shut down.
2.
M0: An Intel ME FW power state when the Intel AMT computer is turned on and operational.
3.
M3: An Intel ME FW power state when the Intel AMT computer is in sleep mode, hibernation mode, or turned off.
10
ThinkCentre M92/p and M92z Intel Active Management TechnologyConfiguration Guide
Option
Option
Description
You can enable, disable, or use the MEBx password to
protect the Intel ME firmware local update. When the
Local FW Update option is set to ENABLED, the IT
administrator can update the Intel ME firmware locally
through the local Intel ME interface or through the local
secure interface. When the Local FW Update option is
set to DISABLED, local Intel ME firmware update is not
allowed. When the Local FW Update option is set to
Password Protected, Local FW update is protected by
the MEBx password.
Description
Used to specify when the Intel ME will be turned on.
Select Intel(R) ME ON in Host Sleep States and press
Enter. You can choose which power package will be used.
• Desktop: ON in S0 – This option means the Intel ME
will be turned on when your computer is turned on and
operational .
• Desktop: ON in S0, ME Wake in S3, S4-5 – This
option means the Intel ME will be turned on when your
computer is turned on and operational. The Intel ME
can be remotely woken up when your computer is in
sleep mode, hibernation mode, or turned off.
Notes:
– S0: Power on state
– S3: Standby sleep state
– S4: Hibernate sleep state
– S5: Shutdown state
With Intel ME Wake on LAN (WOL), after the time-out
timer expires, the Intel ME remains in the M-off
a command is sent to the Intel ME. After this command is
sent, the Intel ME will transition to the M0
and will respond to the next command. A ping to the Intel
ME can also make the Intel ME transition to the M0 or M3
state. The Intel ME takes a short time to transition from
the M-off state to the M0 or M3 state. During this time,
the system will not respond to any Intel ME commands.
When the Intel ME is in the M0 or M3 state, the system
will respond to Intel ME commands.
Used to enable the Intel ME to wake up and define the
Intel ME idle timeout in the M3 state. The idle timeout
value indicates the amount of time that the Intel ME is
1
state until
2
or M3
3
state