Lenovo ThinkPad series Instrukcja instalacji - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Pulpit Lenovo ThinkPad series. Lenovo ThinkPad series 46 stron. Bluetooth laser mouse
Również dla Lenovo ThinkPad series: Zawiadomienie o przepisach (12 strony), Zawiadomienie o przepisach (12 strony), Skrócona instrukcja obsługi (1 strony), Podręcznik użytkownika (48 strony), Podręcznik użytkownika (17 strony), Podręcznik użytkownika (42 strony), Instrukcja gwarancyjna (38 strony), Podręcznik wdrażania (26 strony), Instrukcja bezpieczeństwa i gwarancji (20 strony), Skrócona instrukcja obsługi (2 strony)

c. View the list partitions. If no partitions exist, than Press Esc go to step g. If

partitions are listed, the partitions must be deleted sequentially from non-DOS,

Logical DOS Drives, Extended DOS partitions to Primary Partitions. Press Esc

to return to main fdisk menu

d. Type "3" to delete the partition and Press Enter

e. Depending on the existing partitions select the appropriate selection. Press Enter.

Repeat this step however many partitions you need to delete.

f. Once all partitions are deleted, you need to new create partitions.

g. When creating partitions, the partitions need to be created sequentially from

Primary to Secondary partition. To create partition, Type "1" and press Enter

h. Select the appropriate selection, Press enter.

When prompt for maximum use of the size, select yes to create the maximum

size partition. Select no to set your own partition size.

When all logical drives are created, Be sure to set the primary partition as Active

k. Reboot the system with the boot disk and format each drive by typing the

following: "format c:" press Enter.

5. Once all partitions are created and formatted, reboot the system with the Boot disk

inserted.

6. Insert Windows Me CD in the CD-ROM/DVD-ROM Drive

7. Type the following "X:\setup" or for ThinkPad 240X and 570E type the following

"X:\setup A:APMINST.INF where the letter "X" is the drive letter destination for your

computer's CD-ROM/DVD-ROM drive. This will initiate the setup and will guide you

rest of the installation.