Lenovo 104614U Podręcznik użytkownika - Strona 25
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Serwer Lenovo 104614U. Lenovo 104614U 32 stron. Remote management user guide
Drukuj stronęConsole Redirection
The Console Redirection page will automatically select the Remote Console option by default. You can open
remote console KVM redirection window from this page.
Click Java Console button to start the redirection console and remotely manage the server.
Note: Before you start JNLP file, the client must be installed with Java Runtime Environment (JRE) V6.0
Update 13 or higher.
Server Power Control
The Server Power Control page shows the server power status.
You can perform the following power control operations:
Reset Server
Power Off Server - Immediate
Power Off Serve - Orderly Shutdown
Power On Server
Power Cycle Server
Perform Action
Note: All power control action can be performed by BMC and responded immediately. It is recommended to shut
down the system through KVM interface or other interfaces before the initialization power action.
Other Control
You can click the Chassis Locate LED button to control the status of the chassis ID light, including four
control options: Off (extinguish immediately), 15 Seconds (extinguish after 15 seconds), 60 Seconds
(extinguish after 60 seconds) and Always On (normally on). Select one of them, and then click the Chassis
Locate LED button to perform the corresponding operation.
If you want to clear the CMOS, you can click Clear CMOS to perform the operation.
You can click Lock Local Panel / Unlock Local Panel to lock or unlock the local console for remotely
controlling.
Maintenance
You can click the Enter Update Mode button to enter the maintenance mode in which you can update
the firmware.
Note: Once you click the Enter Update Mode button and enter the maintenance mode, the remote server
will reboot after exit the mode.
The firmware of Remote Management Module can be updated to add new features. The firmware update
files can be sent to you through e-mail or downloaded through the Lenovo® Web site.
Option
Chapter 6
If the option is selected, you can hard reset the host with
the power-off.
If the option is selected, the system can be turned off
immediately.
If the option is selected, the system can save the settings
and shut down.
If the option is selected, the server can be powered on.
If the option is selected, the server can be powered off
immediately and then powered on after a second.
Click and the system can perform the selected remote
power command.
.
ThinkServer Remote Management Module Web console options
Task Description
19