Lenovo 6135-HE 1 Podręcznik użytkownika - Strona 12
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor Lenovo 6135-HE 1. Lenovo 6135-HE 1 29 stron. Flat panel monitor
Drukuj stronę
Adjusting your monitor image
This section describes the user control features used to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Note:
Icon
Using the On-Screen Display (OSD) controls
The settings adjustable with the user controls are viewed through the On-Screen
Display (OSD), as shown below.
To use the controls:
1. Press
2. Use
3. Press
4. Press and hold
5. Enables DDC/CI by default. Use OSD Exit Key,Press and hold the
The direct access controls are orange.
Table 2-1. Direct access controls
Control
Input Change
Image Setup
Brightness
to open the main OSD menu.
or
to move among the icons. Select an icon and press
that function. If there is a sub-menu, you can move between options using
or
, then press
Press
to save.
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
adjustments to the OSD. Press and hold
and allow adjustments to the OSD.
for 10 seconds to disable / enable DDC/CI function. The words " DDC/CI disable"
shows on the screen.
Description
Switches the video input source.
Activates automatic image adjustment.
Direct access to Brightness adjustment.
to select that function. Use
Chapter 2. Adjusting and using your monitor
or
to make adjustments.
for 10 seconds to unlock the OSD
to access
buttons
2-3