Lenovo 61F7 Podręcznik użytkownika - Strona 26

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor Lenovo 61F7. Lenovo 61F7 38 stron.

Drukuj stronę
Lenovo 61F7 Podręcznik użytkownika

Troubleshooting

If you have a problem setting up or using your monitor, you might be able to solve it yourself.
Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your
problem.
Table 3-2. Troubleshooting
Problem
Possible cause
The words "Out
The system is set to a
display mode which is
of Range" are
shown on the
not supported by the
screen, and the
monitor.
power indicator
is flashing green.
The image
The video signal cable
quality is
is not connected with
the monitor or system
unacceptable.
completely.
The color settings may
be incorrect.
y The monitor's
The power
indicator is not
power switch is not
lit and there is no
switched on.
image.
y The power
cord is loose or
disconnected.
y There is no power
at the outlet.
The monitor is in
Screen is blank
Standby / Suspend
and power
mode.
indicator is
amber.
The power
The video signal
indicator is
cable is loose or
orange, but there
disconnected from the
is no image.
system or monitor.
The monitor brightness
and contrast are at the
lowest setting.
Suggested action
If you are replacing an old
monitor, reconnect it and
adjust the display mode to
within the specified range for
your new monitor.
If using a Windows system,
restart the system in safe
mode, then select a supported
display mode for your
computer.
If these options do not work,
contact the Support Center.
Be sure the signal cable
is firmly plugged into the
system and monitor.
Select another color setting
from the OSD menu.
y Be sure the power cord is
connected properly.
y Be sure the outlet has
power.
y Power on the monitor.
y Try using another power
cord.
y Try using another
electrical outlet.
y Press any key on the
keyboard or move
the mouse to restore
operation.
y Check the Power Options
settings on your computer.
Be sure the video cable is
connected with the system
properly.
Adjust the brightness and
contrast setting on the OSD
menu.
Reference
"Selecting a supported
display mode"on page
2-6
"Connecting and
turning on your
monitor"on page 1-5
"Adjusting your
monitor image"on
page 2-3
"Connecting and
turning on your
monitor"on page 1-5
"Understanding power
management"on page
2-7
"Connecting and
turning on your
monitor"on page 1-5
"Adjusting your
monitor image"on
page 2-3
3-3
Chapter 3.