Lenovo Yoga 7 Podręcznik użytkownika - Strona 29
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Tablet Lenovo Yoga 7. Lenovo Yoga 7 38 stron.
Również dla Lenovo Yoga 7: Podręcznik użytkownika (46 strony)
Drukuj stronę
Open the UEFI/BIOS setup utility
Step 1.
Turn on or restart the computer.
Step 2.
Press F2 repeatedly.
Note: For computers with hotkey mode enabled, press Fn + F2.
Change the startup sequence
You may need to change the startup sequence to allow the computer to start from another device or a
network location.
Step 1.
Open the UEFI/BIOS setup utility.
Step 2.
Navigate to the Boot menu.
Step 3.
Follow on-screen instructions to change the order of devices under Boot Priority Order.
Note: You can also change startup sequence temporarily without opening the setup utility. To do so, start
the computer. When the Lenovo logo appears, press F12 (or Fn + F12) repeatedly.
Change hotkey mode
Step 1.
Open the UEFI/BIOS setup utility.
Select Configuration ➙ Hotkey Mode and press Enter.
Step 2.
Step 3.
Change the setting to Disabled or Enabled.
Select Exit ➙ Exit Saving Changes.
Step 4.
Enable or disable always-on
For some Lenovo computers with always-on connectors, the always-on function can be enabled or disabled
in the UEFI/BIOS setup utility.
Step 1.
Open the UEFI/BIOS setup utility.
Step 2.
Select Configuration ➙ Always On USB and press Enter.
Step 3.
Change the setting to Disabled or Enabled.
Step 4.
Select Exit ➙ Exit Saving Changes.
Set passwords in UEFI/BIOS setup utility
This section introduces the types of passwords that you can set in the UEFI (Unified Extensible Firmware
Interface) or BIOS (Basic Input/Output System) setup utility.
Password types
You can set various types of passwords in the UEFI/BIOS setup utility.
Password type
Administrator password
User password
Pre-requisite
No
The administrator password must be
set.
Usage
You must enter it to start the setup
utility.
You can use the user password to
start the setup utility.
.
Chapter 3
Explore your computer
23