ACORN AQUA A112408B/S-VR-UBL Instrukcja instalacji, obsługi i konserwacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji, obsługi i konserwacji dla Dozownik wody ACORN AQUA A112408B/S-VR-UBL. ACORN AQUA A112408B/S-VR-UBL 8 stron. Vandal resistant refrigerated universal bi-level aquaaccess barrier free, wall mounted water cooler

Drukuj stronę
This fixture is intended to dispense water that has been lowered in temperature, but otherwise remains
unchanged by the materials in the water cooler. It is common for electrical equipment to be grounded to
water lines either within a structure or away from it. Every attempt should be made to prevent this kind
of grounding from generating electrical feedback into the water cooler creating electrolysis. Electrolysis
will cause a metallic taste or cause water metal content to increase.
A dielectric coupling must be used to connect the water cooler to the water supply. A nonmetallic
coupler is furnished with this water cooler to meet this requirement.
Prior to roughing consult with local, state, and federal codes for proper mounting height.
A112408S/B-VR VANDAL RESISTANT REFRIGERATED UNIVERSAL BI-LEVEL AQUAACCESS
(Standard Configuration Left Unit High with Right Unit Low)
18 1 2 "
[470]
Ø 1 4 " [6]
4 ANCHOR
HOLES
*35 1 8 "
7 7 8 "
[892]
[200]
*21 5 8 "
[549]
GENERAL NOTES:
1.
ALL DIMENSIONS ARE IN INCHES [MM]
2.
ALLOW 4 INCHES [102 MM] MINIMUM CLEARANCE PER SIDE FOR VENTILATION
*3.
DIMENSIONS SHOWN ARE FOR RECOMMENDED ADULT HEIGHT. ADJUST VERTICAL
DIMENSIONS AS NECESSARY TO COMPLY WITH FEDERAL, STATE, & LOCAL CODES.
4.
STOP VALVE, TRAP, & ELECTRICAL OUTLET NOT SUPPLIED.
5.
IMPORTANT: COOLERS MUST BE ATTACHED TO WALL WITH ANCHOR SCREWS.
NOTES:
1. Dimensions shown for ADA compliant installation. For Child ADA 2010 compliant parallel approach
installation, decrease height of * dimensions by 2-3/4".
2. Provide clear floor space as required. Adjust vertical dimensions as required to comply with federal,
state, and local codes.
See next page for alternative mounting of units, roughing-in and dimensional drawing.
IMPORTANT
ROUGHING-IN AND DIMENSIONAL DRAWING
18 5 8 "
[473]
6 5 8 "
6 5 8 "
[168]
[168]
BRACKET
A
AIR FLOW
7 7 8 "
[200]
B
4 1 4 "
*16 3 8 "
5 1 4 "
[108]
[416]
[133]
6 1 2 " [165]
NOTICE
Ø 3 8 " [10]
3 HOLES
EACH
*38 3 4 "
[984]
*37 5 8 "
ORIFICE
[956]
RIM
*29 1 8 "
HEIGHT
[740]
*21 7 8 "
*15 5 8 "
[555]
[397]
Page 2 of 8
18 1 2 "
[470]
*32 3 4 "
C
[832]
*31 5 8 "
ORIFICE
[803]
RIM
HEIGHT
A
Ø3/8" [10] O.D. COPPER TUBE SUPPLY
B
ELECTRICAL OUTLET
C
Ø1-1/4" [32] O.D. P-TRAP (NOT FURNISHED)
*20 7 8 "
[530]
TAILPIECE