Nikon E2 Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Akcesoria do kamer Nikon E2. Nikon E2 25 stron. Extension ring
Również dla Nikon E2: Instrukcja obsługi (11 strony)
Drukuj stronę
Setting the six basic modes simultaneously
(Page 45)
-Command lock is
cancelled.
(See
page
46.)
*
-Command lock (see page
46) and preview mode (see page 8 on this manual) are
canceled.
External synchro-flash shooting
(Page 62)
3
Depress the shutter release button
.
The
"Sy"
mark blinks
in the
LCD panel to
indicate
that the camera is in standby
mode;
pictures
are
taken
in sync with the firing of the
remote speed light
-
The
standby mode will be canceled approx.
10
seconds after depressing the shutter
release button if the firing of the remote
speedlight is not detected by the
camera.
3
Depress the shutter release button
.
The
"Sy"
mark blinks in the
LCD
panel to
indicate
that
the camera is
in
standby
mode;
pictures
are taken in sync with the
firing
of
the
remote speed
light.
-The standby mode will be canceled
approx.
2 minutes after depressing the shutter
release button if the firing of the remote
speedlight is not detected by the
camera.
-To cancel the standby
mode,
rotate the
Main
dial to
L
and turn the power
OFF.
Note
that
the mirror remains in the up position
throughout.
Set the Main dial to L and
turn
the power ON again to bring the mirror back
down.
7