Nikon eclipse e100 Instrukcja obsługi - Strona 34

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Mikroskop Nikon eclipse e100. Nikon eclipse e100 44 stron.

CAUTION

• Make sure that the contact of the fuse is not damaged before installing a new

fuse. If the contact is damaged, a malfunction or overheating may result.

• Attach the fuse to the fuse holder securely. If not, the fuse may come loose or a

contact failure may occur, resulting in overheating or smoke.

• Put back the fuse holder securely to its original position.

(1) Turn off the power switch (turn to

(2) Remove the fuse holder using the flatblade precision screwdriver. (Use the tip of the

screwdriver to push the two lock plates toward the center of the fuse holder. The fuse

folder pops out from the AC -IN socket.)

(3) Wear gloves and emove two fuses and the

voltage selector from the fuse holder.

(4) Attach the voltage selector to the fuse holder

so that the indication of the voltage provided

in your region appears in the window of the

fuse holder.

(5) Put the fuses and the fuse holder back in

place. Be sure to push both sides of the

fuse holder firmly till it clicks into place.

) and unplug the power cord.

Fuses

Voltage

indication

Lock plate

Voltage selector

Window

Fuse holder